Cold Saw/V1 Design Files: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(15 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Uniform Part Dimensions=
*'''Plate: 25.4mm x 304.8mm''' (Base Plate, Swivel Plate)
*'''Flat Bar: 76.2mm x 50.8mm''' (Shaft Block, Fixed Block, Moving Block)
*'''Flat Bar: 25.4mm x 127mm''' (Support Bar, Bridge Bar, Interface Bar, Vise Jaw)
*'''Flat Bar: 3.175mm x 25.4mm''' (Blade Guard Support)
*'''Flat Bar: 1.6mm x 152.4mm''' (Blade Guard)
*'''Round Bar: 152.4mm DIA''' (Base Disc)
*'''Round Bar: 127mm DIA''' (Blade Mount Disc)
*'''Round Bar: 76.2mm DIA''' (Shaft Collar with Axial Tensioning, Large Thrust Washer)
*'''Round Bar: 50.8mm DIA''' (Shaft Coupling, Shaft Collar)
*'''Round Bar: 31.8mm DIA''' (Shaft, Operation Handle, Vise Handle)
*'''Round Bar: 8mm DIA''' (Small Rod)
*'''Setscrew: M8x1.25 THREAD'''
*'''Bolts and Nuts: M12x1.75 THREAD'''
*'''Threaded Rod: M30x3.5 THREAD'''
*'''Nuts: M30x3.5 THREAD'''
=Uniform Mounting Dimensions=
=Uniform Mounting Dimensions=


*'''Base Plate to Base Flat: 80mm x 300mm'''
*'''Base Plate to Base Flat: 80mm x 520mm'''


*'''Base Flat to Vise: 50mm x 90mm'''
*'''Base Flat to Vise: 50mm x 90mm'''


*'''Vise Rod to Rod: 95mm'''
*'''Vise Rod to Rod: 95mm'''
*'''Swivel Plate to Rotary Shaft Block: 30mm x 55mm'''


*'''Support Flat to Interface Flat: 75mm x 80mm'''
*'''Support Flat to Interface Flat: 75mm x 80mm'''
Line 52: Line 14:


=Uniform Fasteners=
=Uniform Fasteners=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Nut Small Nut]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Bolt Short Bolt]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Bolt Short Bolt]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Screw Long Screw]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Screw Long Screw]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long2_Screw Long2 Screw]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew]
Line 64: Line 26:


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Threaded_Rod Threaded Rod]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Threaded_Rod Threaded Rod]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Short_Threaded_Rod Short Threaded Rod]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Nut Small Nut]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Nut Large Nut]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Nut Large Nut]
Line 98: Line 64:


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin_Collar Small Shaft Collar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin_Collar Small Shaft Collar]
=Base System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Baseplate Base Plate]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Flat Base Flat]
=Vise System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Fixed_Block Fixed Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Moving_Block Moving Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Clamp_Block Clamp Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Vise_Jaw Vise Jaw]
=Swivel System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Shaft_Block Shaft Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Swivel_Plate Swivel Plate]
=Support System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Bar Support Bar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Bridge_Bar Bridge Bar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Interface_Plate Interface Plate]
=Drive System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Hydraulic_Motor Hydraulic Motor]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Shaft_Coupling Shaft Coupling]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Mount_Disc Mount Disc]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade Blade]
=Blade Guard System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Support Blade Guard Support]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard Blade Guard]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Side Blade Guard Side]


=Assemblies=
=Assemblies=

Latest revision as of 18:53, 20 June 2012

Uniform Mounting Dimensions

  • Base Plate to Base Flat: 80mm x 520mm
  • Base Flat to Vise: 50mm x 90mm
  • Vise Rod to Rod: 95mm
  • Support Flat to Interface Flat: 75mm x 80mm
  • Hydraulic Motor to Interface Flat: 40mm x 100mm
  • Blade Guard to Interface Flat: 80mm x 100mm

Uniform Fasteners

Short Bolt

Long Screw

Long2 Screw

Short Setscrew

Long Setscrew

Threaded Rod

Short Threaded Rod

Small Nut

Large Nut

Uniform Spacers

Short Spacer

Long Spacer

Uniform Shafts

Vise Handle

Operation Handle

Pin

Coupling Pin

Support Shaft

Drive Shaft

Uniform Shaft Accessories

Thrust Washer

Large Thrust Washer

Large Shaft Collar

Medium Shaft Collar

Small Shaft Collar

Assemblies

Base Assembly

Vise Assembly

Swivel Assembly

Support Assembly

Drive Assembly

Blade Guard Assembly

Full Assembly

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files&oldid=66418"