Hole Connector: Difference between revisions

Latest revision as of 00:29, 7 September 2012

Redirect to:

@@ Line 1: / Line 1: @@
-=Summary=
+#redirect [[Cable Gland]]
-The objective is a waterproof, corrosion-resistant, chemical-resistant, impact-resistant, redeployable device that mounts onto the material surrounding a hole and allows electrical transmission through that hole.
-The hole connector applies tension with an elastic, fine contact material on the cross-sectional perimeter of a transmission line that passes through the hole.
-The hole connector is made with a double-end male thread with an inner diameter(hydraulic nipple). A nut and O-ring are used to mount and seal one thread end to the case wall's hole.
-[[Image:holeconnector.png|500px]]