Dairy Milker/Manufacturing Instructions: Difference between revisions

Latest revision as of 16:07, 20 December 2012

Milk Bucket

Milk Bucket

Teat Cups

If you bought them prefabricated, install inflations and connect to milk and vacuum tubes coming from the milk bucket.
If you are fabricating them:

Pulsator

Pulsator

Vacuum pump

@@ Line 1: / Line 1: @@
-Milk Bucket Fabrication Diagram:
+==Fabrication Diagrams==
-[[File:milkbucket.skp]]
+[[File:milkbucket.jpeg|thumb|Milk Bucket]]
-Pulsator Fabrication Diagram:
+'''Milk Bucket'''
-[[File:pulsator.skp]]
+*Milk Bucket Fabrication Diagram: [[File:milkbucket.skp]]
+#Fabricate milk bucket
+#Install gaskets
+#Install tubing, pulsator, check valve
+'''Teat Cups'''
+*If you bought them prefabricated, install inflations and connect to milk and vacuum tubes coming from the milk bucket.
+*If you are fabricating them:
+#Remove plungers from 600 cc syringe
+#Drill vacuum hole
+#Install barb coupler and seal with silicone
+#Connect tubing
+<html><img src="https://docs.google.com/drawings/pub?id=10Pq42mA7_E7_kINm72rdTR_R2TufWdhMH4HVS2kDPLI&amp;w=270&amp;h=390"></html>
+[https://docs.google.com/drawings/pub?id=10Pq42mA7_E7_kINm72rdTR_R2TufWdhMH4HVS2kDPLI&w=960&h=720 edit drawing]
+[[File:pulsator.jpeg|thumb|Pulsator]]
+'''Pulsator'''
+*Pulsator Fabrication Diagram: [[File:pulsator.skp]]
+#Fabricate pulsator body
+#Install gasketry
+#Assemble solenoids
+#Connect tubing
+'''Vacuum pump'''
+#Install vacuum regulator (if necessary)
+#Connect tubing to milk bucket