Rapid Prototyping with Laser Cutter: Difference between revisions
Jump to navigation
Jump to search
(Created page with "https://docs.google.com/a/opensourceecology.org/drawings/d/1NJ31HXt7_RPRWk9RRS7BtnHeH43iBt6YuVYfukeCDyY/edit") |
No edit summary |
||
| Line 1: | Line 1: | ||
https://docs.google.com/a/opensourceecology.org/drawings/d/1NJ31HXt7_RPRWk9RRS7BtnHeH43iBt6YuVYfukeCDyY/edit | [https://docs.google.com/a/opensourceecology.org/drawings/d/1NJ31HXt7_RPRWk9RRS7BtnHeH43iBt6YuVYfukeCDyY/edit edit] | ||
Notes on scale model: (1) Tooling fit - not possible in cad. (2) Interference prior to assembly - a bolt can fit, but you can't tell if it is insertable in the first place | |||
(3) Tubing - don't know how it bend upon motion. (4) CAD program can't verify assembly order - it will allow you to assemble something without it being possible in physical reality. | |||
Revision as of 20:38, 30 August 2013
Notes on scale model: (1) Tooling fit - not possible in cad. (2) Interference prior to assembly - a bolt can fit, but you can't tell if it is insertable in the first place (3) Tubing - don't know how it bend upon motion. (4) CAD program can't verify assembly order - it will allow you to assemble something without it being possible in physical reality.