Ironworker Shearing Test Plan: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Test plan for 10/25/13: Phase 1 - blade non-pass through tests using hold-down. Goal: robust shearing of 1"x6" flat slabs of mild steel. *Theoretical angle of blade upon to...") |
|||
| Line 19: | Line 19: | ||
==Limit tests== | ==Limit tests== | ||
1"x7" and up | 1"x7" and up - feasibility of whih is determined during testing | ||
Revision as of 14:31, 25 October 2013
Test plan for 10/25/13:
Phase 1 - blade non-pass through tests using hold-down. Goal: robust shearing of 1"x6" flat slabs of mild steel.
- Theoretical angle of blade upon touchdown of pivot end: 1/12
- Measured angle, to 1/16 height accuracy at both blade end separation distances
Cutting tests
Non-Pass Through
- 1/4"x2"
- 1/2"x2" up to 1/2"x6"
- 1" rebar
- 1x2 to 1"x6" -
Pass through Cutting Tests
1. 1/2x7 - 1/2"x12"
Limit tests
1"x7" and up - feasibility of whih is determined during testing