Cris Log: Difference between revisions

Revision as of 14:58, 4 June 2014

Documented problems encountered during Lasersaur Exterior Panel Installation
Started Workshop reorganize and fixed some power tool plugs and extension cord ends.
Worked with a team to reassemble the CEB Press. Learned it is important to have a CAD model that matches the actual model. Also good to replace nuts and washers onto corresponding bolts while disassembling in order to simplify reassembly.

Sketchup practice
CEB Press 6 - Drawer Guides - Build Instructions
Started Mounting Lasersaur CNC Laser Cover Plates: need to drill additional holes as per Lasersaur Manual
Edited Lasersaur CAD model to include dimensions and location of panel holes [1],[2],[3],[4],[5],[6]

@@ Line 1: / Line 1: @@
 ==Tues. 3 Jun 2014==
-Documented problems encountered during [http://opensourceecology.org/wiki/Lasersaur_Exterior_Panel_Installation Lasersaur Exterior Panel Installation]
+*Documented problems encountered during [http://opensourceecology.org/wiki/Lasersaur_Exterior_Panel_Installation Lasersaur Exterior Panel Installation]
+*Started Workshop reorganize and fixed some power tool plugs and extension cord ends.
+*Worked with a team to reassemble the CEB Press.  Learned it is important to have a CAD model that matches the actual model.  Also good to replace nuts and washers onto corresponding bolts while disassembling in order to simplify reassembly.
 ==Mon. 2 Jun 2014==