Window Requirement: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
*No trim required after stucco is applied to metal lath on outside | *No trim required after stucco is applied to metal lath on outside | ||
*Indoor connection to wall includes stucco on interior. | *Indoor connection to wall includes stucco on interior. | ||
*Contract-First Design - | *Contract-First Design - Define any window module as a 4' width (standard 4'x8' construction material for zero wastage) | ||
*Modularity - | *Test-Driven Development - Test the sample range of sizes for commonly available windows. Test the interface design for fit into a frame. Fit test Condition: determine standard window size for house sliding storm windows. Then oversize the frame to allow all window sized to fit. Devise insulation pattern to match. | ||
*Modularity - wrapper (interface on interface) must be defined in 4x8 standard panel size to fit - so frames are identical, but | |||
*Iterative Design - | *Iterative Design - | ||
*Flexibility - | *Flexibility - | ||
*Swarming - | *Swarming - | ||
* | * | ||
Revision as of 23:33, 31 August 2014
See Door Requirement also.
- Starts at height which joins top of window frame right under bond beam.
- No trim required after stucco is applied to metal lath on outside
- Indoor connection to wall includes stucco on interior.
- Contract-First Design - Define any window module as a 4' width (standard 4'x8' construction material for zero wastage)
- Test-Driven Development - Test the sample range of sizes for commonly available windows. Test the interface design for fit into a frame. Fit test Condition: determine standard window size for house sliding storm windows. Then oversize the frame to allow all window sized to fit. Devise insulation pattern to match.
- Modularity - wrapper (interface on interface) must be defined in 4x8 standard panel size to fit - so frames are identical, but
- Iterative Design -
- Flexibility -
- Swarming -