Power Cube II: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 23: Line 23:
*Hydraulic pump - 14 gpm at 3600 rpm, CW rotation - from Power Cube I - [https://www.surpluscenter.com/item.asp?item=9-1788-B&catname=hydraulic]
*Hydraulic pump - 14 gpm at 3600 rpm, CW rotation - from Power Cube I - [https://www.surpluscenter.com/item.asp?item=9-1788-B&catname=hydraulic]


==Power Cube==


*Note: pump is already obtained
*<span style="color:#0000f1">[1] Coupler half, 5/8" - [http://www.mcmaster.com/#6408k15/=1qajma $10]
*<span style="color:#0000f1">[1] Coupler half, 1" - [http://www.mcmaster.com/#6408k15/=1qakef $10]
*<span style="color:#0000f1">[1] Solid spider - [http://www.mcmaster.com/#6408k95/=1qale7 $14]
*<strike>[1] Breather cap - [https://www.surpluscenter.com/item.asp?item=9-7285-75&catname=hydraulic] - $8 </strike>
**<span style="color:purple">[1] 3/4 NPT coupling - found at big box hardware stores
*<span style="color:green">[1] Suction strainer, 2" to 1-1/4" - [https://www.surpluscenter.com/item.asp?item=9-7290-125&catname=hydraulic] - $23
**Use for dual Power Cubes
**<span style="color:purple">[1] Use 2" coupler from bix box store to thread into Power Cube frame
*<span style="color:green">[1] Pressure relief for power cube bypass- [https://www.surpluscenter.com/item.asp?item=9-6135-50-H&catname=hydraulic]
*[1] 20 GPM return Line Filter - [https://www.surpluscenter.com/item.asp?item=9-059&catname=hydraulic]
*[1] 3/4" NPT Swivel for return line filter going into frame - [https://www.surpluscenter.com/item.asp?item=9-1404-12-12&catname=hydraulic]
*[2] 3/4" NPT hex nip on both sides of filter - [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic]
*[1] 1"-3/4" NPT reducer bushing for frame receptacle for return filter - [https://www.surpluscenter.com/item.asp?item=9-5406-16-12&catname=hydraulic]
*[1] 3/4" quick coupler for return line to filter
*[2] 1/2" quick couplers for main power lines
*
Hoses:
*[1] 2 foot hose from pump outlet to return line filter - [https://www.surpluscenter.com/item.asp?item=905-1224&catname=hydraulic]
*[2] 10 foot hoses, already have these - [https://www.surpluscenter.com/item.asp?item=905-12120&catname=hydraulic]
Pressure Bypass:
*[1] 1/2" NPT Bypass valve - [https://www.surpluscenter.com/item.asp?item=9-6135-50-H&catname=hydraulic]
*[3] 1/2" Quick couplers - 1 complete for tee near pump, one going from return filter to tee, and male tip for return line. This gives one extra female quick coupler left over. This set of 3 QCs does not cover hoses going from and to the PowerCube.
*[4] 1/2" NPTF hex nip for one and other side of tee, on both tees - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic]
*[2] 1/2" NPTF tee - from outlet of pump to pressure bypass, and from bypass valve into return line filter - [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]
[[Category:Power Cube]]
[[Category:Power Cube]]

Revision as of 02:18, 26 August 2010

Parts List

Power Cube II engine
Breather cap
Suction strainer, 14 gpm
Suction strainer, 23 gpm
Hydraulic pump, 14 gpm
  • Engine - $479 - [1]. Sorry, steam engine is forthcoming.
  • Breather cap - [2] - $8
    • 3/4 NPT coupling - found at big box hardware stores
  • Suction strainer, 1.5" - [3] - $20
    • Use this for single Power Cube
    • 1-1/2" NPT coupling for threading suction strainer into frame - found at big box hardware
  • Suction strainer, 2" - [4] - $23
    • Use for dual Power Cubes
    • Use 2" coupler from bix box store to thread into Power Cube frame
  • Hydraulic pump - 10 gpm at 3600 rpm, CW rotation - from Power Cube I - [5]
  • Hydraulic pump - 14 gpm at 3600 rpm, CW rotation - from Power Cube I - [6]

Power Cube

  • Note: pump is already obtained
  • [1] Coupler half, 5/8" - $10
  • [1] Coupler half, 1" - $10
  • [1] Solid spider - $14
  • [1] Breather cap - [7] - $8
    • [1] 3/4 NPT coupling - found at big box hardware stores
  • [1] Suction strainer, 2" to 1-1/4" - [8] - $23
    • Use for dual Power Cubes
    • [1] Use 2" coupler from bix box store to thread into Power Cube frame
  • [1] Pressure relief for power cube bypass- [9]
  • [1] 20 GPM return Line Filter - [10]
  • [1] 3/4" NPT Swivel for return line filter going into frame - [11]
  • [2] 3/4" NPT hex nip on both sides of filter - [12]
  • [1] 1"-3/4" NPT reducer bushing for frame receptacle for return filter - [13]
  • [1] 3/4" quick coupler for return line to filter
  • [2] 1/2" quick couplers for main power lines

Hoses:

  • [1] 2 foot hose from pump outlet to return line filter - [14]
  • [2] 10 foot hoses, already have these - [15]

Pressure Bypass:

  • [1] 1/2" NPT Bypass valve - [16]
  • [3] 1/2" Quick couplers - 1 complete for tee near pump, one going from return filter to tee, and male tip for return line. This gives one extra female quick coupler left over. This set of 3 QCs does not cover hoses going from and to the PowerCube.
  • [4] 1/2" NPTF hex nip for one and other side of tee, on both tees - [17]
  • [2] 1/2" NPTF tee - from outlet of pump to pressure bypass, and from bypass valve into return line filter - [18]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Power_Cube_II&oldid=13777"