Power Cube II: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 26: Line 26:
*Pump inlet - SAE 12 to 3/4 hose barb connector - [https://www.surpluscenter.com/item.asp?UID=2009050516281116&item=9-4604-12-12&catname=hydraulic $4.69]
*Pump inlet - SAE 12 to 3/4 hose barb connector - [https://www.surpluscenter.com/item.asp?UID=2009050516281116&item=9-4604-12-12&catname=hydraulic $4.69]


=Reservoir=
==Reservoir==
*Breather cap - [https://www.surpluscenter.com/item.asp?item=9-7285-75&catname=hydraulic] - $8
*Breather cap - [https://www.surpluscenter.com/item.asp?item=9-7285-75&catname=hydraulic] - $8
**3/4 NPT coupling - found at big box hardware stores
**3/4 NPT coupling - found at big box hardware stores
Line 64: Line 64:
Pressure Bypass:
Pressure Bypass:


*[1] 1/2" NPT Bypass valve - [https://www.surpluscenter.com/item.asp?item=9-6135-50-H&catname=hydraulic]
*<span style="color:green">[1] 1/2" NPT Bypass valve - [https://www.surpluscenter.com/item.asp?item=9-6135-50-H&catname=hydraulic]
*[3] 1/2" Quick couplers - 1 complete for tee near pump, one going from return filter to tee, and male tip for return line. This gives one extra female quick coupler left over. This set of 3 QCs does not cover hoses going from and to the PowerCube.
*[3] 1/2" Quick couplers - 1 complete for tee near pump, one going from return filter to tee, and male tip for return line. This gives one extra female quick coupler left over. This set of 3 QCs does not cover hoses going from and to the PowerCube.
*[4] 1/2" NPTF hex nip for one and other side of tee, on both tees - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic]
*[4] 1/2" NPTF hex nip for one and other side of tee, on both tees - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic]
*[2] 1/2" NPTF tee - from outlet of pump to pressure bypass, and from bypass valve into return line filter - [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]
*[2] 1/2" NPTF tee - from outlet of pump to pressure bypass, and from bypass valve into return line filter - [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]
[[Category:Power Cube]]
[[Category:Power Cube]]

Revision as of 03:18, 26 August 2010

Parts List

Power Cube II engine
Breather cap
Suction strainer, 14 gpm
Suction strainer, 23 gpm
Hydraulic pump, 14 gpm

Engine

  • Engine - $479 - [1]. Sorry, steam engine is forthcoming.

Engine Coupling to Pump

  • Coupler half, 5/8" - $10
  • Coupler half, 1" - $10
  • Solid spider - $14

Pump

  • Hydraulic pump - 0.677 cu in, 5/8" keyed shaft, 10.1 gmp @3600 RPM, 3000 PSI max, 4000 RPM max - $180
  • Pump outlet - SAE 10 to 1/2 NPTM straight - $1.89
  • 1/2" quick coupler - same as above - $16
  • Suction Hose
  • 3/4 NPTM to hose barb connector - $4.69
  • Pump inlet - SAE 12 to 3/4 hose barb connector - $4.69

Reservoir

  • Breather cap - [2] - $8
    • 3/4 NPT coupling - found at big box hardware stores
  • Suction strainer, 1.5" - [3] - $20
    • Use this for single Power Cube
    • 1-1/2" NPT coupling for threading suction strainer into frame - found at big box hardware
  • Suction strainer, 2" - [4] - $23
    • Use for dual Power Cubes
    • Use 2" coupler from bix box store to thread into Power Cube frame
  • Hydraulic pump - 10 gpm at 3600 rpm, CW rotation - from Power Cube I - [5]
  • Hydraulic pump - 14 gpm at 3600 rpm, CW rotation - from Power Cube I - [6]


  • [1] Coupler half, 5/8" - $10
  • [1] Coupler half, 1" - $10
  • [1] Solid spider - $14
  • [1] Breather cap - [7] - $8
    • [1] 3/4 NPT coupling - found at big box hardware stores
  • [1] Suction strainer, 2" to 1-1/4" - [8] - $23
    • Use for dual Power Cubes
    • [1] Use 2" coupler from bix box store to thread into Power Cube frame
  • [1] Pressure relief for power cube bypass- [9]
  • [1] 20 GPM return Line Filter - [10]
  • [1] 3/4" NPT Swivel for return line filter going into frame - [11]
  • [2] 3/4" NPT hex nip on both sides of filter - [12]
  • [1] 1"-3/4" NPT reducer bushing for frame receptacle for return filter - [13]
  • [1] 3/4" quick coupler for return line to filter
  • [2] 1/2" quick couplers for main power lines

Hoses:

  • [1] 2 foot hose from pump outlet to return line filter - [14]
  • [2] 10 foot hoses, already have these - [15]

Pressure Bypass:

  • [1] 1/2" NPT Bypass valve - [16]
  • [3] 1/2" Quick couplers - 1 complete for tee near pump, one going from return filter to tee, and male tip for return line. This gives one extra female quick coupler left over. This set of 3 QCs does not cover hoses going from and to the PowerCube.
  • [4] 1/2" NPTF hex nip for one and other side of tee, on both tees - [17]
  • [2] 1/2" NPTF tee - from outlet of pump to pressure bypass, and from bypass valve into return line filter - [18]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Power_Cube_II&oldid=13779"