How to Seal Hot Water Pipe Joints: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Keywords: penetrating, anaerobic, thread sealer, thread locker, penetrating grade, wicking grade | Keywords: penetrating, anaerobic, thread sealer, thread locker, penetrating grade, wicking grade | ||
Note: wicking type thread lockers are recommended for up to 1/2" size bolts | |||
*Loctite Putty - 121C - [http://www.loctiteproducts.com/p/epxy_putty/overview/Loctite-Repair-Putty-Multi-Purpose.htm] | *Loctite Putty - 121C - [http://www.loctiteproducts.com/p/epxy_putty/overview/Loctite-Repair-Putty-Multi-Purpose.htm] | ||
Revision as of 00:57, 22 January 2017
Keywords: penetrating, anaerobic, thread sealer, thread locker, penetrating grade, wicking grade
Note: wicking type thread lockers are recommended for up to 1/2" size bolts
- Loctite Putty - 121C - [1]
- JB Waterweld - 300F - can cure wet - [2]
- Gorilla epoxy - 200F - [3]
- JB 2 Part - 500F - [4]
- Penetrating threadlocker, can be applied after assembly - does not say temp - only 1/2" pipes - [5]
- JB - penetrating, 300F, water? - [6]
- BSI - 300F penetrating, water resistant - [7].
- MG Chemicals - 350F, water proof - [8]. [9]
- VibraTite - 300F, water?, 1/2" bolt - [10]