Open Source Stepper Motor Controller: Difference between revisions
Jump to navigation
Jump to search
Leo.dearden (talk | contribs) |
Leo.dearden (talk | contribs) |
||
| Line 1: | Line 1: | ||
=Introduction= | =Introduction= | ||
Stepper motors are the simplest drive for moderate precision motion control applications (such as CNC plasma cutting). They provide the best price:performace for low to moderate mechanical power (<200W) at low to moderate RPM (<500 RPM). There is no open source stepper driver, AFAIK. This project will fill that need. | |||
=Concept= | =Concept= | ||
=Design Rationale= | =Design Rationale= | ||
Revision as of 23:01, 4 November 2010
Introduction
Stepper motors are the simplest drive for moderate precision motion control applications (such as CNC plasma cutting). They provide the best price:performace for low to moderate mechanical power (<200W) at low to moderate RPM (<500 RPM). There is no open source stepper driver, AFAIK. This project will fill that need.
Concept
Design Rationale
Block Diagram and Modules
References
Development Team
Leo.dearden - Ideas. I'm to busy to do very much at the moment, but I'll do what I can.