D3D Lulzbot Cura: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Introduction= Lulzbot Cura allows for ready setup of machines other than Lulzbot and Lulzbot Mini. By going to Expert-> Switch to Full Settings - you can set nozzle size...") |
(→Files) |
||
| Line 8: | Line 8: | ||
Configuration (.ini) file for D3D Lulzbot Cura: | Configuration (.ini) file for D3D Lulzbot Cura: | ||
[[File:D3DOriginal_config.ini]] - D3D Original, 16" frame, 8" print bed | [[File:D3DOriginal_config.ini]] - D3D Original, 16" frame, 8" print bed, 0.5" nozzle. | ||
Revision as of 21:06, 9 June 2017
Introduction
Lulzbot Cura allows for ready setup of machines other than Lulzbot and Lulzbot Mini. By going to Expert-> Switch to Full Settings - you can set nozzle size and various parameters. Once all configuration has been input, you can save the profile as a .ini file.
To configure a new machine (bed size) go to the menu - Machine-> Add New Machine - you can add a profile for the D3D Original - 8" print bed.
Files
Configuration (.ini) file for D3D Lulzbot Cura:
File:D3DOriginal config.ini - D3D Original, 16" frame, 8" print bed, 0.5" nozzle.