Marlin Settings for Geared Extruders: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Marlin is Acting Up= This [https://e3d-online.dozuki.com/Guide/Titan+Aero+Marlin+Configuration/39] shows how to set up Marlin for a geared Titan Aero extruder. Setting the A...") |
No edit summary |
||
| Line 2: | Line 2: | ||
This [https://e3d-online.dozuki.com/Guide/Titan+Aero+Marlin+Configuration/39] shows how to set up Marlin for a geared Titan Aero extruder. Setting the Axis steps was done - yet extrusion happens now at a very slow rate, almost invisible. Testing extrusion in Cura works as it should - only to fail upon running a print. What gives?? | This [https://e3d-online.dozuki.com/Guide/Titan+Aero+Marlin+Configuration/39] shows how to set up Marlin for a geared Titan Aero extruder. Setting the Axis steps was done - yet extrusion happens now at a very slow rate, almost invisible. Testing extrusion in Cura works as it should - only to fail upon running a print. What gives?? | ||
*Could config.ino be overriding steps per mm? | |||
Revision as of 21:02, 25 April 2018
Marlin is Acting Up
This [1] shows how to set up Marlin for a geared Titan Aero extruder. Setting the Axis steps was done - yet extrusion happens now at a very slow rate, almost invisible. Testing extrusion in Cura works as it should - only to fail upon running a print. What gives??
- Could config.ino be overriding steps per mm?