D3D v18.06 Conceptual Design: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Universal Axis= *See Universal Axis for axis design *Note: axis motor piece can be cut 1" to allow only a 3 bolt mounting for the stepper") |
No edit summary |
||
| Line 2: | Line 2: | ||
*See [[Universal Axis]] for axis design | *See [[Universal Axis]] for axis design | ||
*Note: axis motor piece can be cut 1" to allow only a 3 bolt mounting for the stepper | *Note: axis motor piece can be cut 1" to allow only a 3 bolt mounting for the stepper | ||
=Geometry= | |||
*Using external axis mounting allows for all the axes to be identical in lenght, thereby reducing part count over internal axis mounting design - where X and Y axes (as well as bed rods) would otherwise be of different length | |||
Revision as of 22:44, 27 June 2018
Universal Axis
- See Universal Axis for axis design
- Note: axis motor piece can be cut 1" to allow only a 3 bolt mounting for the stepper
Geometry
- Using external axis mounting allows for all the axes to be identical in lenght, thereby reducing part count over internal axis mounting design - where X and Y axes (as well as bed rods) would otherwise be of different length