RotoKnitic v19.01: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 13: | Line 13: | ||
[https://docs.google.com/drawings/d/1cJI2ldYQc8stUkN_m6oAq8sJfdkBs8hRQC-ZErb_UMs/edit google doc] | [https://docs.google.com/drawings/d/1cJI2ldYQc8stUkN_m6oAq8sJfdkBs8hRQC-ZErb_UMs/edit google doc] | ||
==Goals== | |||
===Needle Accomidation=== | |||
*Test laser cut needles, printed latch? | |||
*Test 3D printed needles | |||
===Fabric Spool=== | |||
*Apply constant tension on fabric | |||
*Roll onto spool for easy handling and storage | |||
Revision as of 06:25, 8 March 2019
Using same parts and materials from OSE CircularKnitic v18.03, but switch mounting plates so that the mountain is stationary.
- requires spinning spool for fabric output
- allows for more multiple mountains and input threads
Design
- Needles will rotate in the needle holder
Concept
Goals
Needle Accomidation
- Test laser cut needles, printed latch?
- Test 3D printed needles
Fabric Spool
- Apply constant tension on fabric
- Roll onto spool for easy handling and storage