Continuous Fiber 3D Printing: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Embed a continuous strand of fiber into plastics *2 nozzles - one for plastic and another for fiber? *https://www.compositesworld.com/blog/post/3d-printing-composites-with-co...") |
No edit summary |
||
| Line 2: | Line 2: | ||
*2 nozzles - one for plastic and another for fiber? | *2 nozzles - one for plastic and another for fiber? | ||
*https://www.compositesworld.com/blog/post/3d-printing-composites-with-continuous-fiber | *https://www.compositesworld.com/blog/post/3d-printing-composites-with-continuous-fiber | ||
*If glass fiber is 500ksi - then embedding glass fiber would yield the strength of steel if used at 10% of thickness | |||
Revision as of 04:19, 19 February 2019
- Embed a continuous strand of fiber into plastics
- 2 nozzles - one for plastic and another for fiber?
- https://www.compositesworld.com/blog/post/3d-printing-composites-with-continuous-fiber
- If glass fiber is 500ksi - then embedding glass fiber would yield the strength of steel if used at 10% of thickness