Copper Sulfate: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "=About= *Naturally occurring crystal, dissolved and electroplated readily to make copper-coated surfaces. Such as circuit boards on 3D printed objects. *For copper plating of...")
 
Line 3: Line 3:
*For copper plating of plastic, need to coat the plastic first with a conductor - [http://srjcstaff.santarosa.edu/~yataiiya/E45/PROJECTS/Electroplating%20Organic%20Materials.pdf]
*For copper plating of plastic, need to coat the plastic first with a conductor - [http://srjcstaff.santarosa.edu/~yataiiya/E45/PROJECTS/Electroplating%20Organic%20Materials.pdf]


=Plating Nonconductors=
*Forum thread, useful suppliers - [https://www.finishing.com/09/34.shtml]
*Electroless by a vendor - [https://www.sharrettsplating.com/blog/electroplating-non-conductive-materials/]


=Sourcing=
=Sourcing=
*$3/lb - [https://www.seedranch.com/Copper-Sulfate-Crystal-p/CSC-Small-10.htm?gclid=EAIaIQobChMI6NPU173h4AIVnbXACh1gcQHdEAYYBCABEgLXQfD_BwE]
*$3/lb - [https://www.seedranch.com/Copper-Sulfate-Crystal-p/CSC-Small-10.htm?gclid=EAIaIQobChMI6NPU173h4AIVnbXACh1gcQHdEAYYBCABEgLXQfD_BwE]

Revision as of 17:49, 1 March 2019

About

  • Naturally occurring crystal, dissolved and electroplated readily to make copper-coated surfaces. Such as circuit boards on 3D printed objects.
  • For copper plating of plastic, need to coat the plastic first with a conductor - [1]

Plating Nonconductors

  • Forum thread, useful suppliers - [2]
  • Electroless by a vendor - [3]

Sourcing