Insulated Heatbed: Difference between revisions
Jump to navigation
Jump to search
(→BOM) |
(→BOM) |
||
| Line 10: | Line 10: | ||
*Binder clips, 3/4" or 19mm - hold up to 1/3" - [https://www.amazon.com/Brands-Binder-Holding-Capacity-144-Count/dp/B00T8W2U2M] | *Binder clips, 3/4" or 19mm - hold up to 1/3" - [https://www.amazon.com/Brands-Binder-Holding-Capacity-144-Count/dp/B00T8W2U2M] | ||
*Butt crimp connectors , uninsulated - [https://www.amazon.com/Glarks-Non-Insulated-Connectors-Assortment-Uninsulated/dp/B07HP185C1/ref=asc_df_B07HP185C1/?tag=hyprod-20&linkCode=df0&hvadid=241996167289&hvpos=1o5&hvnetw=g&hvrand=17862432916241200819&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023315&hvtargid=pla-599231127248&psc=1] | *Butt crimp connectors , uninsulated - [https://www.amazon.com/Glarks-Non-Insulated-Connectors-Assortment-Uninsulated/dp/B07HP185C1/ref=asc_df_B07HP185C1/?tag=hyprod-20&linkCode=df0&hvadid=241996167289&hvpos=1o5&hvnetw=g&hvrand=17862432916241200819&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023315&hvtargid=pla-599231127248&psc=1] | ||
*Insulate with Kapton tape | *Insulate with Kapton tape or fiberglass sleeve after butt connectors | ||
*High temp wire - $8 for 25' - [https://www.ebay.com/itm/16-AWG-Blue-W-White-Stripe-200c-High-Temperature-Appliance-Wire-SRML-25-FT/292929909347?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20131003132420%26meid%3D105fa444d1a94e9780b74e30c0237093%26pid%3D100005%26rk%3D2%26rkt%3D12%26sd%3D291933498327%26itm%3D292929909347&_trksid=p2047675.c100005.m1851] | |||
=Links= | =Links= | ||
*Materials sourcing - [[120V Heatbed]] | *Materials sourcing - [[120V Heatbed]] | ||
Revision as of 21:46, 17 April 2019
Requirements
- Insulated bed works with OSE Thermite Bed, 12/24V industry standard, and 8" silicone heatpad. Smaller bed may be used, such as 6 or 4 inch, and can work decently because of 2" insulation layer.
- Nichrome heater, butt connectors
BOM
- Binder clips, 3/4" or 19mm - hold up to 1/3" - [1]
- Butt crimp connectors , uninsulated - [2]
- Insulate with Kapton tape or fiberglass sleeve after butt connectors
- High temp wire - $8 for 25' - [3]
Links
- Materials sourcing - 120V Heatbed