3D Printer Tuning: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
=First Layer Adhesion Calibration= | |||
*Just do a circle: and test quickly that you are getting first layer properly - by observing whether first layer is perfectly flat | |||
* | |||
=Print Area Testing= | =Print Area Testing= | ||
*For an 8" bed - use this 8" square - [[File:8inchsquare.fcstd]]. STL - [[File:8inchsquare.stl]] | *For an 8" bed - use this 8" square - [[File:8inchsquare.fcstd]]. STL - [[File:8inchsquare.stl]] | ||
Revision as of 21:27, 15 March 2020
First Layer Adhesion Calibration
- Just do a circle: and test quickly that you are getting first layer properly - by observing whether first layer is perfectly flat
Print Area Testing
- For an 8" bed - use this 8" square - File:8inchsquare.fcstd. STL - File:8inchsquare.stl
- 7" square - File:7inchsquare.fcstd. STL - File:7inchsquare.stl
Calibration of Filament and Bed Level
Procedure