Revision as of 20:19, 22 September 2019

General Performance

10A discharge, self-protection circuit inside.
3.7V
3 Ahr
18 minutes of 37W
10W for 1 hour
100 of these give 1 kWhr
45g each, so 1 kWhr weighs 4.5 kg.
At this density, ultra light cars (500 lb total) - will have 30 miles per kwhr.
1kwhr ~ 4MJ - so about 1/10 kg gasoline. Given gas is 20% efficient in cars, we have 1/2 kg equivalent. Tbis gets us to about 240 mpg equivalent.
With 1 kW solar added- that gets us to about 400 mpg equivalent.

Can 18650 cells really discharge at 10A rate? Yes! [1] - Panasonic goes up to 20 amp rate. 6S (6 cell) packs are 22v. 10 of these, if discharged at 20A, give a 200A welder for 6 minutes. See Discharge Rate.
Crappy ones can be as low as delivering 2.5A each - [2]. With 100 of these, that's still a 250A welder which has a weight of 5 kg for the batteries. Still impressive.

While specs say 250 cycles for 15A discharge - Multiple thousands of cycles are possible when charged to 80% and drained to 30%. - [4]

These appear to be on spec at 3000 mAh - [7].
Cycle life and specs - [8] - 250 cycles to 70% of rated
1000 cycles at 6A discharge rate bottoming at about 60% capacity for 2000 cycles? - [9]. So these last pretty long.

Fantastic forms for recycling old 18650s into DIY Power Walls https://secondlifestorage.com/index.php

@@ Line 7: / Line 7: @@
 *18 minutes of 37W
 *10W for 1 hour
-*30 of these give 1 kWhr
+*100 of these give 1 kWhr
-*45g each, so 1 kWhr weighs 1.5 kg.
+*45g each, so 1 kWhr weighs 4.5 kg.
 *At this density, ultra light cars (500 lb total) - will have 30 miles per kwhr.
 *1kwhr ~ 4MJ - so about 1/10 kg gasoline. Given gas is 20% efficient in cars, we have 1/2 kg equivalent. Tbis gets us to about 240 mpg equivalent.