Weld Deposition Rate: Difference between revisions
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
*12' length of diameter. 12 SF per foot of height. 6" build per hour. 400 hours for tower, or just 17 days. Could possibly increase to 12 welders, at 8 days for the tower. | *12' length of diameter. 12 SF per foot of height. 6" build per hour. 400 hours for tower, or just 17 days. Could possibly increase to 12 welders, at 8 days for the tower. | ||
*'''This tower is 24000 lb - 120 lb/ft''' | *'''This tower is 24000 lb - 120 lb/ft''' | ||
*It would be useful to make wire for reduced cost. If produced from scrap, tower could cost not $ | *It would be useful to make wire for reduced cost. If produced from scrap, tower could cost not $24k but 1/10th. | ||
Revision as of 17:19, 12 November 2019
Cost of a 200' Tower, 4' Diameter, 1/4" Wall Thickness
- Metal 3D printing - with MIG welders, 250 amp each at 30V
- Welding wire - $68 for 44 lb - [3]
- Alibaba shows 50 cents per lb - [4]
- 12' length of diameter. 12 SF per foot of height. 6" build per hour. 400 hours for tower, or just 17 days. Could possibly increase to 12 welders, at 8 days for the tower.
- This tower is 24000 lb - 120 lb/ft
- It would be useful to make wire for reduced cost. If produced from scrap, tower could cost not $24k but 1/10th.