Flexible Build Plate: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Hint|Moving to flexible build plate for D3D Universal for easy part removal, using PEI or Buildtak for printing without heatbed. 1 mm should do it - around 0.04" = 1 mm. See McMaster below.]] | |||
=Options= | =Options= | ||
*120C - [https://www.aliexpress.com/item/33000367619.html?spm=a2g0o.productlist.0.0.38fceff15Dv9zG&algo_pvid=715e1be1-b2ac-4181-9c3d-51fca5b0e91a&algo_expid=715e1be1-b2ac-4181-9c3d-51fca5b0e91a-0&btsid=25602d0e-85f1-4a01-84c6-204fdfffb6d3&ws_ab_test=searchweb0_0,searchweb201602_7,searchweb201603_55] | *120C - [https://www.aliexpress.com/item/33000367619.html?spm=a2g0o.productlist.0.0.38fceff15Dv9zG&algo_pvid=715e1be1-b2ac-4181-9c3d-51fca5b0e91a&algo_expid=715e1be1-b2ac-4181-9c3d-51fca5b0e91a-0&btsid=25602d0e-85f1-4a01-84c6-204fdfffb6d3&ws_ab_test=searchweb0_0,searchweb201602_7,searchweb201603_55] | ||
Revision as of 08:36, 5 December 2019
Options
- 120C - [1]
- 80C - [2]
- Magnetic plate for 105C is cheap, but textured spring steel PEI surface is not at $30 minimum - [3] - + PEI spring steel sheet - [4]
- 6x6" spring steel is $2 for 6"x6" sheet - [5]
Notes
- Thicker spring steels - 2 or 10' long strips - around 0.04" - https://www.mcmaster.com/spring-steel
- Buildtak does not provide enough adhesion for ABS without heat - [6]
- But it recommends no heat with PLA
- User review says works without heat all the time for PLA and PETG - [7]
- Spring steel plate is cheap at $3 for a 6"x6" plate from Amazon, 0.01" thick - [8]
- 0.012" or 0.3 mm thick is $2 for a 6x6" plate at McMaster. [9]. Printerware is 0.6 mm - [10]
PEI and No Heat
- Plenty of use cases for using PEI without heat - [11]