Revision as of 10:34, 23 December 2019

Open Source

FreeCAD WizardShaft - https://www.freecadweb.org/wiki/PartDesign_WizardShaft. This provides moment of inertia, but not deflection.

1 lb force, on a 12" shaft. Force point in middle of shaft, so this would be worst case scenario

Interpretation: for reference, this is about 100 micron deflection, but if shaft were supported on one end, so actual result is better.

Revision as of 10:33, 23 December 2019 (view source) Marcin (talk \| contribs) No edit summary ← Older edit		Revision as of 10:34, 23 December 2019 (view source) Marcin (talk \| contribs) (→‎Example) Newer edit →
Line 7:		Line 7:

	[[File:1lb.png]]		[[File:1lb.png]]

			Interpretation: for reference, this is about 100 micron deflection, but if shaft were supported on one end, so actual result is better.