Revision as of 18:20, 17 June 2020

Basics

Name may need changing, doesn't seem to fit
Essentially build a d3d, in a similar fashon to how the 3d printing channels do their live builds
Will need multiple cameras most likely?
Need to plot what cameras to do and how

Open Source Overhead Camera Rig (for flat/top down assembly view (can do some tilt etc too with the right mount) )
Webcam for just talking bits? (could easily use integrated webcam, if on the user's pc)
Either a seperate usb webcam, or some sort of Camera PC Tethering setup for one the user can take with them?

@@ Line 4: / Line 4: @@
 *Will need multiple cameras most likely?
 * '''Need to plot what cameras to do and how
+=Reverse Engineering Of Existing Streams=
+*In the stream show here: [https://youtu.be/OviarRja9F0 Part 1 of 3DMN's Stream on making the E3D Toolchanger]
+*They used:
+**Main Camera: Panasonic Lumix G7: http://geni.us/LumixG7
+**(B-Roll) Canon EOS760D: http://geni.us/CanonEOS
+**Canon EF 10-18mm: http://geni.us/CanonEF1018
+**Canon Lens: http://geni.us/Canon2470
+**ElGato Stream Deck: http://geni.us/Streamdeck
+**Elgato HD60S Capture Card: http://geni.us/elgatohd60
+**Timelapse - GoPro Hero 5: http://geni.us/GoProH5
+**Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkit
+**Light Boxes: http://geni.us/StudioLights
+**High Speed SD Card: http://geni.us/SandiskSD
 =Cameras Used=
-*[[Open Source Overhead Camera Rig]]
+*[[Open Source Overhead Camera Rig]] (for flat/top down assembly view (can do some tilt etc too with the right mount) )
-*[[Webcam]] for just talking bits?\
+*[[Webcam]] for just talking bits? (could easily use integrated webcam, if on the user's pc)
-*Need to reverse engineer some live builds
+*Either a seperate usb webcam, or some sort of [[Camera PC Tethering]] setup for one the user can take with them?
+=OBS Setup/Workflow=
+*
 =D3D Used=