Revision as of 19:21, 26 July 2020

Notes

Full file of 14:20, 26 July 2020 is at https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/finished__base.fcstd
You can regain full base from test print file by removing the cuts from version 20:31, 24 July 2020

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	04:46, 24 June 2021	(96 KB)	Marcin (talk \| contribs)
	23:56, 9 September 2020	(651 KB)	Marcin (talk \| contribs)	Update with holes for mounting to base. + Power cord zip tie hole.
	21:28, 11 August 2020	(93 KB)	Marcin (talk \| contribs)	Dumb version of final file.
	21:26, 11 August 2020	(442 KB)	Marcin (talk \| contribs)	Moved motor mount on bed to the back.
	21:00, 11 August 2020	(176 KB)	Marcin (talk \| contribs)	Base with strengthened reinforcement at back.
	16:56, 31 July 2020	(88 KB)	Marcin (talk \| contribs)	Widened controller mount hole by 0.6 mm (0.3 mm outwards in each direction)
	20:34, 26 July 2020	(87 KB)	Marcin (talk \| contribs)	Finished base - with allowance for Z axis motor piece set screw.
	20:22, 26 July 2020	(86 KB)	Marcin (talk \| contribs)	Deepened Z axis bolt hole to 20 mm.
	19:20, 26 July 2020	(84 KB)	Marcin (talk \| contribs)	Dumb object of finished file ready for test print.
	18:58, 26 July 2020	(979 KB)	Marcin (talk \| contribs)	Update of hole next to z motor.

You cannot overwrite this file.

The following page uses this file:

@@ Line 1: / Line 1: @@
 =Notes=
+*Full file of '''14:20, 26 July 2020''' is at https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/finished__base.fcstd
 *You can regain full base from test print file by removing the cuts from version '''20:31, 24 July 2020'''