Bearings, bushings, and geardowns BOM: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*For printing 3D Printed Ball Bearings, we need bearing balls, 3D printing filament, and m6 bolts: **Bearing_Balls - get 6-10 balls per bearing, in sizes from 6 mm for sma...") |
No edit summary |
||
| Line 2: | Line 2: | ||
**[[Bearing_Balls]] - get 6-10 balls per bearing, in sizes from 6 mm for small bearings to 3/4" balls for large bearings. | **[[Bearing_Balls]] - get 6-10 balls per bearing, in sizes from 6 mm for small bearings to 3/4" balls for large bearings. | ||
**M6 bolts - get m6x18 metric bolts - these are already in the [[D3D Universal 2]] bill of materials, and we use them throughout other projects. | **M6 bolts - get m6x18 metric bolts - these are already in the [[D3D Universal 2]] bill of materials, and we use them throughout other projects. | ||
**Filament - this is the source we use - [[3D Printing Filament]] | **Filament - this is the source we use - [[3D Printing Filament]]. We need PLA for normal printing, and TPU for rubber belts. | ||
Revision as of 20:42, 24 August 2020
- For printing 3D Printed Ball Bearings, we need bearing balls, 3D printing filament, and m6 bolts:
- Bearing_Balls - get 6-10 balls per bearing, in sizes from 6 mm for small bearings to 3/4" balls for large bearings.
- M6 bolts - get m6x18 metric bolts - these are already in the D3D Universal 2 bill of materials, and we use them throughout other projects.
- Filament - this is the source we use - 3D Printing Filament. We need PLA for normal printing, and TPU for rubber belts.