Multimachine Parts: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
=Introduction=
=Introduction=


This is a detailed parts list for a 2-engine block Multimachine powered by a hydraulic motor running from [[LifeTrac]] hydraulics.
This is a detailed parts list for a 2-engine block [[Multimachine]] powered by a hydraulic motor running from [[LifeTrac]] hydraulics.


'''Engine Blocks'''
'''Engine Blocks'''

Revision as of 15:11, 20 February 2011

Introduction

This is a detailed parts list for a 2-engine block Multimachine powered by a hydraulic motor running from LifeTrac hydraulics.

Engine Blocks

  1. Block 1 -
  2. Block 2 -
  3. Mounting between both engine blocks -

Spindle

  1. Shaft - 3.5" XXHW pipe, 2.875 OD, 1.771 ID
  2. Bearings - 65 mm (about 2.6") ID tapered bearings
  3. Clamps -

Chuck

  1. Chuck mounting plate -
  2. Chuck -
  3. Chuck key -

Tool Holders

  1. Cross slide - [1]
  2. Tool post for lathing -
  3. Lathe bits -

Engine Stand

Motor

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Multimachine_Parts&oldid=19232"