Multimachine Parts
Introduction
This is a detailed parts list for a 2-engine block Multimachine powered by a hydraulic motor running from LifeTrac hydraulics.
Engine Blocks
- Block 1 -
- Block 2 -
- Mounting between both engine blocks -
Spindle
- Shaft - 3.5" XXHW pipe, 2.875 OD, 1.771 ID
- Bearings - 65 mm (about 2.6") ID tapered bearings
- Clamps -
Chuck
- Chuck mounting plate -
- Chuck -
- Chuck key -
Tool Holders
- Cross slide - [1]
- Tool post for lathing -
- Lathe bits -
Engine Stand
Motor