Compressed Air Storage Calculations: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 51: Line 51:


=Air Drill=
=Air Drill=
*1 hp - [https://www.flexibleassembly.com/Chicago-Pneumatic-Key-Chuck-Drill-1Hp-CP1117P26]
*1 hp - [https://www.flexibleassembly.com/Chicago-Pneumatic-Key-Chuck-Drill-1Hp-CP1117P26]. 30 CFM at 1 hp [https://www.cp.com/en-us/tools/products/drills/cp1117p26]
*0.5 hp - [https://www.flexibleassembly.com/Chicago-Pneumatic-Drill-Key-Chuck-05Hp-CP1014P05]
*0.5 hp - [https://www.flexibleassembly.com/Chicago-Pneumatic-Drill-Key-Chuck-05Hp-CP1014P05]. 19 cfm. [https://www.cp.com/en-us/tools/products/drills/cp1014p05]


=Specific Cases of Motor Power=
=Specific Cases of Motor Power=

Revision as of 05:55, 9 February 2021

Calculations for a 1kWhr System

Calculator

See https://www.tribology-abc.com/abc/thermodynamics.htm

According to the calculator, a 50 l tank of air at 3000 psi will release about 0.5kWhr via adiabatic expansion, and 2.5x this with isothermal expansion.

Rough Calculations

  • Air tools require 30 cfm for 1 hp [1]
  • A 300 cuf tank thus gives 10 minutes, about, of 1 hp power. With radial piston motor - at 10-20 the efficiency, easily gives 1 hp hr. Let's get specifics.
  • 6 cylinders would thus give 1 hp hr. Not great, but we can get much better efficiencies from a better air engine.

Air Engine

  • Rotary air engine - [2]
  • 0,75 hp $200 30 cfm [3]
  • Rotary vane, 1.8 hp $200 [4]
  • Radial Piston Motor - 20x more efficient at full load than rotary! [5]
  • Radial vs axial piston motors - [6]
  • Data curve - 25 cu ft/min for 0.8 hp at 100 psi [7]. Thus, 12 minutes on 1 tank of 300 cu ft. Get 5 tanks for 1 hp hr, at cost of $1500. The good part is that the metal tanks will last for ever.

Cylinder Sourcing

  • Firefighter supply - 300 cf $300 [8]
  • 250 cf - $285 [9]
  • 250 cf = $330 [10] K size?
  • T-size 300 cf - [11]
  • T goes up to 390 cf - [12]

Compressor

  • Scuba compressor - $243, 1800W - [13]

Technical

  • Compressed Air Index - [14]
  • Energy stored in a cubic meter of volume at 70 bar is 6.3 kWhr. [15]. Compare to 300 cu ft - which correcponds to 42l volume inside - 0.04 cu meter - but equiv to 0.1 of the above if done at 200 bar - then energy stored in the gas cylinder is 0.6 kWhr. And before, we said we have 12 minutes of 0.75 kW. Yes, figures match assuming around 20% efficiency of air motor.
  • One k type cylinder, 50 l volume, gives 5300 kJ or 1.4kWhr of stored energy under isothermal expansion. Thus, Wikipedia [16] checks with online calculator [17].

3D Printed

  • Diaphragm air-tight engine seems to work reasonably well [18]

  • Tech used: diaphragm and bump valve without spring. Diaphragm acts as spring.
  • 5x bigger version - [19]

Efficiencies

  • Piston engine - 13% at 5 bar [20]
  • 50 Whr/l at 300 bar [21]
  • This with 50 kwHr/cubic meter. Does not match 6.4 kwhr at 70 bar [22]? Possibly, though simple multiplication yields 25 kWhr/cu m.
  • Harmonic motor 60% efficient? [23]. You can license it form LLN, where you can Pay for the Results Twice.

Air Drill

Specific Cases of Motor Power

edit

Links