Door and Window Detail: Difference between revisions
Jump to navigation
Jump to search
| Line 16: | Line 16: | ||
==Flashing Corners made from the Same Material== | ==Flashing Corners made from the Same Material== | ||
*This is part-count reduction friendly, eliminating a specialized product and using multipurpose components for robustness, resilience, and antifragility. | *This is part-count reduction friendly, eliminating a specialized product and using multipurpose components for robustness, resilience, and antifragility. | ||
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/HdiVvCJSzyM" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html> | |||
=Rough Window and Door Opening= | =Rough Window and Door Opening= | ||
Revision as of 22:33, 4 June 2021
Flashing Tape
Flashing Tape to Back Edge of Rough Opening
- Corners have 12" long piece, folded around corner. Or use flashing corners
- this example shows flashing tape over rough opening overlapping only about 1.5" of the front face
- Go 6" up from sill pan [1]
- Requirement is that flashing tape (self-sealing) extend beyond the window/opening flange. Since most flanges are under 2", that means 4" tape will do - to cover both window opening and to reach the house wrap. [2]
Flashing tape does not go to back of Rough Opening
- Flashing tape vs flashing corners - flex tape is used in video below.
- On sides of window (jamb) - tape is used on top of the nailing flange
Flashing Corners made from the Same Material
- This is part-count reduction friendly, eliminating a specialized product and using multipurpose components for robustness, resilience, and antifragility.
Rough Window and Door Opening