CEB Press/Manufacturing Instructions/Frame with main cylinder: Difference between revisions
Jump to navigation
Jump to search
William Neal (talk | contribs) No edit summary |
|||
| Line 12: | Line 12: | ||
*1” shaft, 6” long (main cylinder mount) | *1” shaft, 6” long (main cylinder mount) | ||
*5 X 8 3000PSI Welded Cross-Tube Hydraulic Cylinder [http://stores.daltonhydraulic.com/-strse-530/Welded-Cross-dsh-Tube-Prince-Hydraulic/Detail.bok?category=Welded+Cross-Tube+Hydraulic+Cylinders%3A5+Inch+Bore Buy] | *5 X 8 3000PSI Welded Cross-Tube Hydraulic Cylinder [http://stores.daltonhydraulic.com/-strse-530/Welded-Cross-dsh-Tube-Prince-Hydraulic/Detail.bok?category=Welded+Cross-Tube+Hydraulic+Cylinders%3A5+Inch+Bore Buy] | ||
== Fabrication Steps == | == Fabrication Steps == | ||
===Step 1: Cut pieces=== | ===Step 1: Cut pieces=== | ||
[[Image:channel.jpg|thumb|Step 1. Torch or cold-cut channel to size]] | [[Image:channel.jpg|thumb|Step 1. Torch or cold-cut channel to size]] | ||
Cut the following pieces: | Cut the following pieces out of the 6 inch heavy (7/16") u-channel steel: | ||
*2 pieces, 40 3/4" | *2 pieces, 40 3/4" | ||
*4 pieces, 18" | *4 pieces, 18" | ||
| Line 30: | Line 23: | ||
===Step 2: Punch holes=== | ===Step 2: Punch holes=== | ||
[[Image:punchedholes.jpg|thumb|Step 2]] | [[Image:punchedholes.jpg|thumb|Step 2]] | ||
| Line 36: | Line 30: | ||
===Step 4: Prepare Hydraulic Cylinder=== | ===Step 4: Prepare Hydraulic Cylinder=== | ||
== Diagram and video explantion == | |||
This diagram shows the pieces needed for the frame. Click to enlarge: | |||
[[Image:feflibframe.jpg|400px]] | |||
<html><embed src="http://blip.tv/play/AYHmjQYA" type="application/x-shockwave-flash" width="426" height="340" allowscriptaccess="always" allowfullscreen="true"></embed></html> | |||
Revision as of 15:36, 28 June 2011
Main > Housing and construction > CEB Press > CEB press building instructions
Tools Required
- torch
- hole punch
Materials Required
- 6 inch heavy (7/16") u-channel - ( 20 ft )
- bolts
- 3”x3”x1/2” (8) (cylinder mounts for both cylinders)
- 1” shaft, 6” long (main cylinder mount)
- 5 X 8 3000PSI Welded Cross-Tube Hydraulic Cylinder Buy
Fabrication Steps
Step 1: Cut pieces
Cut the following pieces out of the 6 inch heavy (7/16") u-channel steel:
- 2 pieces, 40 3/4"
- 4 pieces, 18"
- 2 pieces, 26"
- 2 pieces 1/4”x10”x18” (bent 1.5” off the edge the long way)
Step 2: Punch holes
Step 3: Bolt pieces together
Step 4: Prepare Hydraulic Cylinder
Diagram and video explantion
This diagram shows the pieces needed for the frame. Click to enlarge:
