CEB Press/Manufacturing Instructions/Roller guides: Difference between revisions
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
== Tools Required == | == Tools Required == | ||
*Hole punch or drill with 1/2" bit | |||
*Welder | |||
== Materials Required == | == Materials Required == | ||
Revision as of 18:11, 11 August 2011
Main > Housing and construction > CEB Press > CEB press building instructions
Tools Required
- Hole punch or drill with 1/2" bit
- Welder
Materials Required
- 30”x2”x1/2” (2)
- 30”x2.5”x3/16” (2)
- 3/8”x2”x8.5” (2)
- 1/2”x2”x3.5” (2)
- 1/2”x2”x4 3/4” (2)
- 12mm V Groove Guide Bearing:Sealed Buy
Diagrams
Fabrication Steps
punch 1/2" holes:
- 3/8”x2”x8.5” (2) – 3” sep at center
- 1/2”x2”x3.5” (2) – 1” off end
- 1/2”x2”x4 3/4” (2) – 1” off end