Revision as of 14:33, 2 September 2021

Updated Walls

Updated wall modules https://drive.google.com/drive/folders/1g7LEFEEsaIRU5bAUBurge6YieXr0s1pV?usp=sharing

1st story all assembly (some details on the modules are outdated, do not use these as reference to build modules, only for assembly purposes) https://drive.google.com/drive/folders/1Lp3ILl0fBzTP_3jjFQgMABeLTGtGfYU9?usp=sharing

Vertical assembly simulation File: https://drive.google.com/file/d/1mX8w3RzRHFxx48XEXSSdMaGa9ojHOana/view?usp=sharing

Folder (it's the wall modules assembly file): https://drive.google.com/drive/folders/1sRERDUL_lp9ukx1uFnxZNu26VTATVoJo?usp=sharing

Roof

Second Story Roof Assembly. Includes joists, OSB, Insulation Box, Insulation, EPDM - FreeCAD - File:SecondStoryRoofv3.fcstd.
Roof Joists. - FreeCAD - File:Roofjoists.fcstd.
Roof Joist Blocking. - FreeCAD - File:Roofjoistblocking.fcstd.
Roof Insulation Box v2. - FreeCAD - File:RoofInsulationBox2.FCStd.
Rigid Insulation. - FreeCAD - File:Rigidinsulation.fcstd.
EPDM. - FreeCAD - File:Epdm.fcstd.
Roof angle for roof is 1.2 Degrees. - FreeCAD - File:Roofangle.fcstd.
Roof Riser Assembly - FreeCAD - File:RoofRiserAssembly.fcstd.
"Roof OSB"- FreeCAD - File:Roof OSB.FCStd.

Walls

Concept / Changes from v2

Seed Eco-Home 3 Wall Module. First Floor. - FreeCAD -File:Diysip.FCStd

Modules

These wall panels use 10' OSB on the exterior. The OSB is offset 0.75" to the left and 1" down on each panel to help align the panel sides, sill, and top plate during installation. The interior side has small temporary pieces of 4" x 4" OSB added to assist with alignment.