LifeTrac v20.12: Difference between revisions
| Line 17: | Line 17: | ||
*Frame - [[File:lt2012frame.fcstd]] | *Frame - [[File:lt2012frame.fcstd]] | ||
*Shaft Assy - [[File:lt2012shaftassy.fcstd]] | *Shaft Assy - [[File:lt2012shaftassy.fcstd]] | ||
*Motor Assy - [[File: | *Motor Assy - [[File:Hydmotorcouplerassy.fcstd]] | ||
*'''Tractor''' - [[File:LT2012.fcstd]] | *'''Tractor''' - [[File:LT2012.fcstd]] | ||
Revision as of 18:05, 26 September 2021
Working Doc
Motor Selection
Track Unit Work Doc
Note that modularity is being built in so that the drive unit can handle both track or wheel drive.
CAD 2 - Summer X 2021 Version
- Frame - File:Lt2012frame.fcstd
- Shaft Assy - File:Lt2012shaftassy.fcstd
- Motor Assy - File:Hydmotorcouplerassy.fcstd
- Tractor - File:LT2012.fcstd
CAD
Gallery:
Dual purpose Universal Track Unit Assembly. Can be driven either with wheel drive or track drive. - FreeCAD -File:Dual UTU.fcstd
Universal Track Unit Assembly from parts. - FreeCAD -File:Utu assy2.fcstd
Hydraulic motor coupler assembly only. - FreeCAD -File:Hydmotorcouplerassy.fcstd
Through keyway hub with track drive. - FreeCAD -File:Throughkeywaysprocket.fcstd
Modular track wheel. - FreeCAD -File:Trackwheel.fcstd
![Idler. Specification of 10" pipe sections used in idlers - [1] - 10.75" OD and .365" wall - FreeCAD -File:Idlerslibrary.fcstd](/images/thumb/e/e1/Idlerslibrary.jpg/120px-Idlerslibrary.jpg)
Idler. Specification of 10" pipe sections used in idlers - [1] - 10.75" OD and .365" wall - FreeCAD -File:Idlerslibrary.fcstd
Modular track unit track. Made using Path Array. FreeCAD file -File:Trackunittrack.fcstd
Track Drive Sprocket. - FreeCAD -File:Drivesprocket1.fcstd
2" Bearing - FreeCAD -File:2inchbearing.fcstd
Extreme Hydraulics Motor EXT-M598WMB - FreeCAD -File:EXT-M598WMB.fcstd.
Big motor drive sprocket - FreeCAD -File:BigDriveSprocket.fcstd.
Coupler for Small drive sprocket and Extreme Hydraulics Motor EXT-M598WMB - FreeCAD - File:ShaftSprocketCoupler.fcstd
Drive Chain made using 100 Pitch Chain and Path Array- FreeCAD - File:DriveChain.fcstd
Motor Drive module, parts list in the file page- FreeCAD - File:MotorDrive.fcstd
1 7/8" Bearing- FreeCAD - File:1inch875Bearing.fcstd
1 7/8" Track Idler Shaft- FreeCAD - File:1inch875IdlerShaft.fcstd
Small Motor Drive Sprocket- FreeCAD - File:SmallDriveSprocket.fcstd
Track Idler module- FreeCAD - File:TrackIdler.fcstd
1 7/8" Track Drive Shaft- FreeCAD - File:1inch875DriveShaft.fcstd
Track Drive module- FreeCAD - File:TrackDrive.fcstd
Coupler for Track Drive Sprocket and 1 7/8" Track Idler Shaft or 1 7/8" Track Drive Shaft- FreeCAD - File:TrackSprocketCoupler.fcstd
Frame Cover- FreeCAD - File:FrameCover.fcstd
17 teeth 100 pitch Sprocket- FreeCAD - File:17teeth100pitchSprocket.fcstd
35 teeth 100 pitch Sprocket- FreeCAD - File:35teeth100pitchSprocket.fcstd
Deprecated:
Hydraulic motor, BMER-2-250. - FreeCAD -File:Bmer2.FCStd.
Technical
Motor - [2]