Nail Gun: Difference between revisions
Jump to navigation
Jump to search
| Line 10: | Line 10: | ||
==1.5" + 2.5"== | ==1.5" + 2.5"== | ||
*{{check}}Metabo (formerly Hitachi) - $286 [https://smile.amazon.com/Metabo-HPT-NR65AK2-Strap-Tite-Nailer/dp/B07MYWFMBX/ref=sr_1_3?crid=2QH3RL7WIK7OE&keywords=Metabo%2BHPT%2BMetal%2BConnector%2BNailer%2B%7C%2BStrap-Tite%2BFastening%2BSystem%2B%7C%2BPneumatic%2B%7C%2B2-1%2F2-Inch%2BNails%2B%7C%2BNR65AK2%5C&qid=1676847580&sprefix=metabo%2Bhpt%2Bmetal%2Bconnector%2Bnailer%2Bstrap-tite%2Bfastening%2Bsystem%2Bpneumatic%2B2-1%2F2-inch%2Bnails%2Bnr65ak2%2B%2Caps%2C110&sr=8-3&th=1]. 1.5" nails are 4 cents - [https://www.amazon.com/Metabo-HPT-17134HPT-Strap-Tite-Hot-Dipped/dp/B07S7MV4RP/ref=pd_bxgy_vft_high_sccl_1/132-5047007-8400664?pd_rd_w=X1spV&content-id=amzn1.sym.7f0cf323-50c6-49e3-b3f9-63546bb79c92&pf_rd_p=7f0cf323-50c6-49e3-b3f9-63546bb79c92&pf_rd_r=5283K0RTR18ND8MBK0BJ&pd_rd_wg=ZWslm&pd_rd_r=0e30e0f7-697e-4c95-8979-69f1aca7b563&pd_rd_i=B07S7MV4RP&psc=1]. '''Get one with long magazine, not short'''. But, it uses 36 degree nails [https://www.metabo-hpt.com/us/main-navigation/item/nr65ak2-2-1-2-strap-tite-fastening-system-strip-nailer-Metabo-HPT]. However, this nail vendor states explicitly that it takes 30-34 degree nails. [https://www.jensenfasteners.com/products/metabo-hpt-formerly-hitachi-nr65ak2sm-strap-tite-metal-hardware-nailer-1-1-2-to-2-1-2-nr65ak2sm]. Note ''The Metabo HPT NR65AK2 is identical to the Hitachi NR65AK2S.'' | |||
*Metabo Cordless - $400 - [https://www.amazon.com/Metabo-HPT-MultiVolt-Cordless-Connector/dp/B097S8X5X9/ref=psdc_328182011_t3_B00DF069ZC] | *Metabo Cordless - $400 - [https://www.amazon.com/Metabo-HPT-MultiVolt-Cordless-Connector/dp/B097S8X5X9/ref=psdc_328182011_t3_B00DF069ZC] | ||
*Freeman. 30-34 degree - 2.5" nails - 6 cents each [https://www.amazon.com/BOSTITCH-PT-MC14825G-5M-Paper-Collated-Connector/dp/B00WSZLF2C/ref=pd_bxgy_vft_high_sccl_1/132-5047007-8400664?pd_rd_w=ZeE0S&content-id=amzn1.sym.7f0cf323-50c6-49e3-b3f9-63546bb79c92&pf_rd_p=7f0cf323-50c6-49e3-b3f9-63546bb79c92&pf_rd_r=WK615WM8NS09VXGSTJNC&pd_rd_wg=TG2F1&pd_rd_r=02a74059-ee89-4def-814d-a253489e9e90&pd_rd_i=B00WSZLF2C&psc=1]. 5 cents for 1.5" nails. | *Freeman. 30-34 degree - 2.5" nails - 6 cents each [https://www.amazon.com/BOSTITCH-PT-MC14825G-5M-Paper-Collated-Connector/dp/B00WSZLF2C/ref=pd_bxgy_vft_high_sccl_1/132-5047007-8400664?pd_rd_w=ZeE0S&content-id=amzn1.sym.7f0cf323-50c6-49e3-b3f9-63546bb79c92&pf_rd_p=7f0cf323-50c6-49e3-b3f9-63546bb79c92&pf_rd_r=WK615WM8NS09VXGSTJNC&pd_rd_wg=TG2F1&pd_rd_r=02a74059-ee89-4def-814d-a253489e9e90&pd_rd_i=B00WSZLF2C&psc=1]. 5 cents for 1.5" nails. | ||
*Bostitch - $420 - [https://www.amazon.com/BOSTITCH-MCN250-StrapShot-Connector-Nailer/dp/B00AYAAKG0/ref=sr_1_4?crid=3AHSQGJYEPFTI&keywords=bostitch+metal+connector+nailer&qid=1676846046&s=hi&sprefix=bostitch+metal+connector+nailer%2Ctools%2C104&sr=1-4] | *Bostitch - $420 - [https://www.amazon.com/BOSTITCH-MCN250-StrapShot-Connector-Nailer/dp/B00AYAAKG0/ref=sr_1_4?crid=3AHSQGJYEPFTI&keywords=bostitch+metal+connector+nailer&qid=1676846046&s=hi&sprefix=bostitch+metal+connector+nailer%2Ctools%2C104&sr=1-4] | ||
Revision as of 20:59, 25 February 2023
Safety Comic Book
- https://www.cdc.gov/niosh/docs/2013-149/pdfs/2013-149.pdf?id=10.26616/NIOSHPUB2013149
- Bump vs sequential firing [1]. "Bump firing" is also known as "contact firing" - with trigger depressed, nail fires once tip of gun is depressed on wood.
For Metal Connectors
Here, the point of the nail sticks out a little bit so you can go inside holes such as metal connectors.
1.5"
- Masterforce - Gun - works only with 1.5" nails [2]. Non-galv nails - [3]. Galvanized nails - 4 cents -
[4] - Metabo, $200 [5]. Galvanized nails - 6.5 cents. [6]
1.5" + 2.5"
- Metabo (formerly Hitachi) - $286 [7]. 1.5" nails are 4 cents - [8]. Get one with long magazine, not short. But, it uses 36 degree nails [9]. However, this nail vendor states explicitly that it takes 30-34 degree nails. [10]. Note The Metabo HPT NR65AK2 is identical to the Hitachi NR65AK2S.
- Metabo Cordless - $400 - [11]
- Freeman. 30-34 degree - 2.5" nails - 6 cents each [12]. 5 cents for 1.5" nails.
- Bostitch - $420 - [13]
Bump Mode (Automatic) Air Nailer
- 30 degree round head $200 95% positive review HF [14]. Nail size 2" to 3.5"
- Bostich $200 28 degree. Bump fire mode. [15]
- Contact actuated 30+34 degree - $100 - 98% recommended HF [16]
- HF $80 [17]
Vinyl Siding Nailer
- Cordless Dewalt - needs adapter. Great review - [18].
- Uses wide head nails which do not slip through slots of the vinyl siding
- Not same as roofing nailer, but can use roofing nails
- Has a mechanism for adjusting to the correct vertical spacing of vinyl slots
- Uses coil nails
- Roofing nails are ok for vinyl siding - for their wide head [19]
Coil Roofing Nail Gun - 15 degree
- Cordless collated coil roofing DeWalt - $349 - [20]
- Can run 15 degree coil galvanized siding nails through a coil roofing nailer? Yes if you know what you are doing. [21]. Another yes - [22]. Otherwise, you hear 'only roofing nails' or '15 degree nails up to 1.75" long'
- Can be used for vinyl siding [23]