Circular Saw Rip Fence: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Upgrade guide to make end cuts with circular saw [https://youtu.be/2VWfcUZiV2w?t=318].") |
No edit summary |
||
| Line 1: | Line 1: | ||
*Upgrade guide to make end cuts with circular saw [https://youtu.be/2VWfcUZiV2w?t=318]. | *Upgrade guide to make end cuts with circular saw [https://youtu.be/2VWfcUZiV2w?t=318]. | ||
**If work with one cut lenght - can do an end that cuts off say 3" off a 10' stud to make it a precut stud. Easiest would be a jig where entire saw base sits in it, so you just snap saw in and out, no adjustment needed. | |||
Latest revision as of 15:49, 12 April 2025
- Upgrade guide to make end cuts with circular saw [1].
- If work with one cut lenght - can do an end that cuts off say 3" off a 10' stud to make it a precut stud. Easiest would be a jig where entire saw base sits in it, so you just snap saw in and out, no adjustment needed.