Main Cylinder Top/2nd Cyl Bottom Mounts: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
*Cut 1/2"X6"x12" plate | *[1] Cut 1/2"X6"x12" plate | ||
*Cut 1/2"x4"x6" plate | *[2] Cut 1/2"x4"x6" plate | ||
*Mag drill [4] 3/4" holes in 6"x12: plate | *Mag drill or punch [4] 3/4" holes in 6"x12: plate | ||
*Mag drill [2] 1" pin holes on each 4"x6" plate | *Mag drill or punch [2] 1" pin holes on each 4"x6" plate | ||
*Weld 1" drilled out nut onto 4"x6" plates | *Weld 1" drilled out nut onto 4"x6" plates | ||
*Tack [2] plates about 3.5" apart for cylinder mounting | |||
*Weld assembly together with cylinder pin in place (prevents shifting) | *Weld assembly together with cylinder pin in place (prevents shifting) | ||
*Lay assembly in place on frame, and pin bottom of main cylinder into it | *Lay assembly in place on frame, and pin bottom of main cylinder into it | ||
Latest revision as of 01:32, 19 June 2011
- [1] Cut 1/2"X6"x12" plate
- [2] Cut 1/2"x4"x6" plate
- Mag drill or punch [4] 3/4" holes in 6"x12: plate
- Mag drill or punch [2] 1" pin holes on each 4"x6" plate
- Weld 1" drilled out nut onto 4"x6" plates
- Tack [2] plates about 3.5" apart for cylinder mounting
- Weld assembly together with cylinder pin in place (prevents shifting)
- Lay assembly in place on frame, and pin bottom of main cylinder into it