Mount Wheels: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
*Configure LinuxCNC | *Configure LinuxCNC | ||
*Torch out plates (or cut by hand) | *Torch out plates (or cut by hand) | ||
*Grind and ream | |||
*Cut gussets - right angle triangles with 4" legs - 4 per wheel | *Cut gussets - right angle triangles with 4" legs - 4 per wheel | ||
*Weld gussets onto plates | *Weld collar onto wheel plate | ||
*Weld gussets onto wheel plates | |||
[[Category:Fabrication Procedures]] | [[Category:Fabrication Procedures]] | ||
Revision as of 06:01, 19 June 2011
- Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10"
- Download CAM files for wheel plates -[1]
- Configure LinuxCNC
- Torch out plates (or cut by hand)
- Grind and ream
- Cut gussets - right angle triangles with 4" legs - 4 per wheel
- Weld collar onto wheel plate
- Weld gussets onto wheel plates