Mount Wheels: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
*Torch out plates (or cut by hand) | *Torch out plates (or cut by hand) | ||
*Grind and ream | *Grind and ream | ||
*Weld 9/16"x2" bolts onto back of plate with wheel providing pattern | |||
**Put wheel on ground | |||
**Place plate on top of wheel | |||
**Stick bolts in holes and align | |||
**Weld bolt heads to wheel plate. | |||
*Cut gussets - right angle triangles with 4" legs - 4 per wheel | *Cut gussets - right angle triangles with 4" legs - 4 per wheel | ||
*Weld collar onto wheel plate | *Weld collar onto wheel plate | ||
Revision as of 06:04, 19 June 2011
- Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10"
- Download CAM files for wheel plates -[1]
- Configure LinuxCNC
- Torch out plates (or cut by hand)
- Grind and ream
- Weld 9/16"x2" bolts onto back of plate with wheel providing pattern
- Put wheel on ground
- Place plate on top of wheel
- Stick bolts in holes and align
- Weld bolt heads to wheel plate.
- Cut gussets - right angle triangles with 4" legs - 4 per wheel
- Weld collar onto wheel plate
- Weld gussets onto wheel plates