Revision as of 19:21, 5 April 2026

Basics

S3 EFI
An Electronic Fuel Injection System Developed by Robot Cantina (YouTube Channel) / Jimbo that is based off of the Bosch CIS System
- It is somewhat in-between a “dumb” Carburetor system, and a modern “smart” system like a Speeduino with tons of sensors / Dual Injection etc
Low Complexity/Points of Failure, but just smart enough to work reliably is the design goal
As per3:36 in the video,
It DOESN’T HAVE:
- A Crankshaft Position Sensor
- A Throttle Position Sensor
- An Air Intake Temperature Sensor
- Oxygen Sensor
  - This MAY be useful enough to add in in their opinion
It DOES Have:
- A Manifold Absolute Pressure Sensor
- A Thermal Time Switch ( Thermal Fuse ? ) for Cold Start detection+adjustments
- A Delay Based Startup Enrichment

An Amazon Listing for the Kohler EFI Fuel Pump Module
- As per 5:38 in the video, you are not supposed to gravity feed these pumps
- It needs a Diaphragm Pump based low pressure pump to go from fuel tank to it’s low pressure fuel inlet

@@ Line 21: / Line 21: @@
 ==Fuel Pump==
-*
+*[https://amzn.to/47ixj9Y An Amazon Listing for the  Kohler EFI Fuel Pump Module]
+**As per 5:38 in the video,  you are not supposed to gravity feed these pumps
+**It needs a Diaphragm Pump based low pressure pump to go from fuel tank to it’s low pressure fuel inlet
 ==Fuel Injector==