CEB Press/Manufacturing Instructions/Leg Holders: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Leg Holders: Tools: *Torch *Welder Materials: *3/16”x 2 1/2” square steel tubing – 6” long (1) *3/4” nut (1) *3/4” x 2” bolt (1) Instructions: #Torch a 3/4” h...") |
|
(No difference)
| |
Revision as of 02:06, 22 August 2011
Leg Holders:
Tools:
- Torch
- Welder
Materials:
- 3/16”x 2 1/2” square steel tubing – 6” long (1)
- 3/4” nut (1)
- 3/4” x 2” bolt (1)
Instructions:
- Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt
- Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.
- Thread the bolt into the nut