LifeTrac/Three Point Adapter Quick Attach: Difference between revisions
< LifeTrac
Jump to navigation
Jump to search
(Created page with "This is an adapter so you can run three point attachment farm equipment on your life trac. Image:3ptqaon.jpg ==Materials:== *2"x2"x1/4" Tubing- 80" (25" (2) for top and bott...") |
No edit summary |
||
Line 1: | Line 1: | ||
This is an adapter so you can run three point attachment farm equipment on your life trac. | This is an adapter so you can run three point attachment farm equipment on your life trac. | ||
[[Image:3ptqaon.jpg]] | [[Image:3ptqaon.jpg|400px|The Adapter welded to a box blade]] | ||
==Materials:== | ==Materials:== | ||
Line 6: | Line 6: | ||
*3/8"x4" plate- 25" | *3/8"x4" plate- 25" | ||
*1/2"x3" plate- 8" (4" (2)) | *1/2"x3" plate- 8" (4" (2)) | ||
==Fabrication Instructions:= | ==Fabrication Instructions:== | ||
#Weld the basic frame together by making a 25"x14" rectangle with the tubing, with the remaining 10" piece centered in it. | #Weld the basic frame together by making a 25"x14" rectangle with the tubing, with the remaining 10" piece centered in it. | ||
#Weld the 3/8" plate to the proper QA angle (2 1/4" over its length). | #Weld the 3/8" plate to the proper QA angle (2 1/4" over its length). |
Revision as of 22:05, 21 August 2011
This is an adapter so you can run three point attachment farm equipment on your life trac.
Error creating thumbnail: File missing
Materials:
- 2"x2"x1/4" Tubing- 80" (25" (2) for top and bottom, 10" (3) for verticals)
- 3/8"x4" plate- 25"
- 1/2"x3" plate- 8" (4" (2))
Fabrication Instructions:
- Weld the basic frame together by making a 25"x14" rectangle with the tubing, with the remaining 10" piece centered in it.
- Weld the 3/8" plate to the proper QA angle (2 1/4" over its length).
- Place this on the life trac and mark where the eyes need to be welded.
- Weld the eyes to the frame.
- Place on the life trac and mark where the holes need to be on the eyes
- Torch the eye holes and clean them up.