OSE Roof Instructions: Difference between revisions
Jump to navigation
Jump to search
Margaret Ida (talk | contribs) (Created page with " ==ASSEMBLY SHEET FOR WORKSHOP ROOF STRINGERS * Cut one 16’ 2x6” beam to create one 10’8” piece and one 5’4” piece * Cut one 16’ 2x6” beam to create one 10’ pie...") |
Margaret Ida (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
==ASSEMBLY SHEET FOR WORKSHOP ROOF STRINGERS== | |||
==ASSEMBLY SHEET FOR WORKSHOP ROOF STRINGERS | |||
* Cut one 16’ 2x6” beam to create one 10’8” piece and one 5’4” piece | * Cut one 16’ 2x6” beam to create one 10’8” piece and one 5’4” piece | ||
* Cut one 16’ 2x6” beam to create one 10’ piece and one 6’ piece | * Cut one 16’ 2x6” beam to create one 10’ piece and one 6’ piece | ||
| Line 16: | Line 15: | ||
==ASSEMBLY SHEET FOR SUPPLY SHED ROOF STRINGERS | ==ASSEMBLY SHEET FOR SUPPLY SHED ROOF STRINGERS== | ||
*Cut four 16’ 2x6” beams to create four 10’8” pieces and four 5’4” pieces. | *Cut four 16’ 2x6” beams to create four 10’8” pieces and four 5’4” pieces. | ||
*Lay out a supply shed stringer assembly as shown in the diagram. | *Lay out a supply shed stringer assembly as shown in the diagram. | ||
Revision as of 18:12, 13 September 2011
ASSEMBLY SHEET FOR WORKSHOP ROOF STRINGERS
- Cut one 16’ 2x6” beam to create one 10’8” piece and one 5’4” piece
- Cut one 16’ 2x6” beam to create one 10’ piece and one 6’ piece
- Cut two 16’ 2x6” beams to create two 11’ pieces and two 5’ pieces
- Cut one 16’ 2x6” beams to 14’ in length.
- Cut a diagonal piece off one 11’ piece and one full 16’ piece as shown.
- Lay out a 32’ assembly as shown in the diagram
- Spread glue on the 5-1/2” faces and screw together as shown in the detail at about 18” intervals.
- Lay out a 43” assembly as shown in the diagram.
- Spread glue on the 5-1/2” faces and screw together as shown in the detail at about 18” intervals.
Make 5 of each assembly
ASSEMBLY SHEET FOR SUPPLY SHED ROOF STRINGERS
- Cut four 16’ 2x6” beams to create four 10’8” pieces and four 5’4” pieces.
- Lay out a supply shed stringer assembly as shown in the diagram.
- Spread glue on the 5-1/2” faces and screw together as shown in the detail at about 18” intervals.
