Open Source Lathe: Difference between revisions
Jump to navigation
Jump to search
(New page: =Bill of Mateials - Lathe= **Romig bed lathe type - from Multimachine - Image:Romig.jpg **Simple prototype, $486 in materials BOM: ***2 bearings, $50 ***2 mouning plates, 1/2"x6" angl...) |
No edit summary |
||
Line 1: | Line 1: | ||
=Bill of | =Introduction= | ||
Here we are showing the details for fabricating a high-performance (2/1000 accuracy), high power (20 hp) lathe | |||
=Motor= | |||
[[Image:pto_motor.jpg]] | |||
=Bill of Materials - Lathe= | |||
**Romig bed lathe type - from Multimachine - [[Image:Romig.jpg]] | **Romig bed lathe type - from Multimachine - [[Image:Romig.jpg]] |
Revision as of 19:42, 28 January 2009
Introduction
Here we are showing the details for fabricating a high-performance (2/1000 accuracy), high power (20 hp) lathe
Motor
Bill of Materials - Lathe
- Romig bed lathe type - from Multimachine -
- Simple prototype, $486 in materials BOM:
- 2 bearings, $50
- 2 mouning plates, 1/2"x6" angle - $40
- 4 Shaft Collars - $20
- 2" shaft - $20
- DOM tubing, 3", 2" ID - $15
- 8 3/4" bolts for table - $16
- Chuck plate - $40
- Bolts for chuck - $20
- Nuts and bolts for DOM - $5
- XY table - $70 off shelf at Enco - [1]
- Tool post - $10
- table plate - $30
- 2 bags of cement, 80 lb each - $20
- sand, gravel - $10
- TOTAL - $316
- High performance, 2/1000" accuracy with proper technique, stock parts, 1000 lb radial and 200 lb axial load capacity
- Romig bed lathe type - from Multimachine -