CNCCMV2/Structure/Blocks

Fabricate Platform

• 

• File:PlatformV2.pdf

• Qty=1

• Mark all holes using 2 datum edges in the L-shape.

• Drill all holes

Fabricate X Major Block

• 

• File:XMajorBlockV2.pdf

• Qty=2

• Mark all holes for the first block, noting the datum edge orientation.

• Mark the blind holes for the second block in the same way as the first, noting the datum edge orientation.

• Drill a 1/8" dia hole at the stepper shaft mark for the first block.

• Drill 4 holes of 5mm dia at the stepper mount marks for the first block.

• Check mounting compatibility between the first block and the stepper motor.

• Drill a 12mm dia hole at the support shaft mark for the first block.

• Match the 1/8", stepper mount, and support shaft holes from the first block to the second block.

• Check mounting compatibility between the second block and the stepper motor.

• Match the 1/8" and support shaft holes from the first block to 2 X Minor Blocks, ensuring the bottom faces of the match components are flush, and also noting the matching orientation.

• Drill the stepper shaft hole to its correct diameter.

• Drill the blind holes for the first and second blocks.

• Tap the blind holes for the first and second blocks.

Fabricate X Minor Block

• 

• File:XMinorBlockV2.pdf

• Qty=2

• Mark the blind holes for the first and second blocks.

• Drill the blind holes.

• Tap the blind holes.

Fabricate Y Minor Block

• 

• File:YMinorBlockV2.pdf

• Qty=1

• Match the Y-axis thru holes with Y Major Block and Z Mount Block

• Mark all blind holes

• Tap holes as necessary

Fabricate Y Major Block

• 

• File:YMajorBlockV2.pdf

• Qty=1

• Mark all blind holes and remaining thru holes

• Tap holes as necessary

Fabricate Z Minor Block

• 

• File:ZMinorBlockV2.pdf

• Qty=1

• Match all thru holes with Z Major Block, Z Mount Block (both ends), and End Mount Block

• Tap holes as necessary

Fabricate Z Major Block

• 

• File:ZMajorBlockV2.pdf

• Qty=1

Fabricate Z Mount Block

• 

• File:ZMountBlockV2.pdf

• Qty=1

• Mark all blind holes

Fabricate Spindle Block

• 

• File:SpindleBlockV2.pdf

• Qty=1

• Match the mounting thru holes with End Mount Block

• Tap holes as necessary

Fabricate End Mount Block

• 

• File:EndMountBlockV2.pdf

• Qty=1

• Mark all remaining blind holes

• Tap holes as necessary