CEB Press/Manufacturing Instructions/Detroit Fab Lab Solenoid Driver v4: Difference between revisions
Jump to navigation
Jump to search
(adding some design reational) |
(add link to github repo) |
||
| Line 1: | Line 1: | ||
Source File Repository: | |||
All source files are located in this repository: schematics, board layout, netlist, arduino source code, etc. | |||
https://github.com/dwiel/ose-cebpress-controller-board | |||
Goals: | Goals: | ||
Revision as of 20:00, 18 May 2012
Source File Repository:
All source files are located in this repository: schematics, board layout, netlist, arduino source code, etc.
https://github.com/dwiel/ose-cebpress-controller-board
Goals:
- Add Left/Right/Up/Down buttons on board
- Add Left/Right/Up/Down terminal positions for external control
- Add Left/Right/Up/Down to source code
- Build schematic and board layout in with KiCAD
Design Rational:
- Buttons and terminals must all be easy to access
- Circuit board must be easy to etch by hand
- Populating and soldering parts of the circuit board should be easy
- Using more through hole components this time for this reason
- Circuit board should be small so that they are cheaper and faster to etch/mill