Cold Saw/V1 Design Files/Interface Plate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=Interface Plate= | =Interface Plate= | ||
*'''Length: | *'''Length: 300mm''' | ||
*'''Width: 127mm''' | *'''Width: 127mm''' | ||
| Line 37: | Line 37: | ||
*'''Interfacing Hole Spacing Along Length: | *'''Interfacing Hole Spacing Along Length: 200mm, 275mm''' | ||
*'''Interfacing Hole Spacing Along Width: 23.5mm, 103.5m''' | *'''Interfacing Hole Spacing Along Width: 23.5mm, 103.5m''' | ||
Revision as of 21:37, 24 May 2012
Interface Plate
- Length: 300mm
- Width: 127mm
- Thickness: 25.4mm
- Drive Hole Diameter: 57.15mm
- Drive Hole Spacing Along Length: 80mm
- Drive Hole Spacing Along Width: 63.5mm
- Motor Mount Hole Spacing Along Length: 30mm, 130mm
- Motor Mount Hole Spacing Along Width: 43.5mm, 83.5mm
- Motor Mount Hole Diameter: 10.5mm
- Motor Mount Hole Thread: M12x1.75
- Blade Guard Mount Hole Spacing Along Length: 30mm, 130mm
- Blade Guard Mount Hole Spacing Along Width: 23.5mm, 103.5mm
- Blade Guard Mount Hole Diameter: 10.5mm
- Blade Guard Mount Hole Thread: M12x1.75
- Interfacing Hole Spacing Along Length: 200mm, 275mm
- Interfacing Hole Spacing Along Width: 23.5mm, 103.5m
- Interfacing Hole Diameter: 10.5mm
- Interfacing Hole Thread: M12x1.75
- 2D Image
- 3D CAD STP
File:ColdSawV1InterfacePlate.stp
- 2D Fabrication Drawing PDF
File:ColdSawV1InterfacePlate.pdf
- 2D Fabrication Drawing DXF