Cold Saw/V1 Design Files/Blade Guard Support: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
*'''Width: 25.4mm''' | *'''Width: 25.4mm''' | ||
*'''Length: | *'''Length: 630mm''' | ||
*'''Bend | *'''Bend 90 degrees clockwise at 115mm''' | ||
*'''Bend | *'''Bend 90 degrees clockwise at 515mm''' | ||
*'''Mount Hole Diameter: 12mm''' | *'''Mount Hole Diameter: 12mm''' | ||
*'''Mount Hole Spacing Along Length: | *'''Mount Hole Spacing Along Length: 40mm, 265mm, 365mm, 590mm''' | ||
*'''Mount Hole Spacing Along Width: 12.7mm''' | *'''Mount Hole Spacing Along Width: 12.7mm''' | ||
Revision as of 23:08, 24 May 2012
Blade Guard Support
- Shape: Bent Flat Bar
- Thickness: 3.175mm
- Width: 25.4mm
- Length: 630mm
- Bend 90 degrees clockwise at 115mm
- Bend 90 degrees clockwise at 515mm
- Mount Hole Diameter: 12mm
- Mount Hole Spacing Along Length: 40mm, 265mm, 365mm, 590mm
- Mount Hole Spacing Along Width: 12.7mm