Cold Saw/V1 Design Files/Swivel Plate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
(Created page with "=Swivel Plate= *'''Length: *'''Width: *'''Thickness: 25.4mm''' *'''Swivel Hole Diameter: *'''Swivel Hole Spacing Along Length: 250mm''' *'''Swivel Hole Spacing Along Widt...") |
|||
| Line 14: | Line 14: | ||
*'''Swivel Hole Spacing Along Width: 155mm''' | *'''Swivel Hole Spacing Along Width: 155mm''' | ||
*'''Support Hole Diameter: 12mm with 25mm dia 20 deep countersink''' | |||
*'''Support Hole Spacing Along Length: 10mm, 65mm''' | |||
*'''Support Hole Spacing Along Width: 25.4mm, 155mm''' | |||
*'''Clamp Hole Diameter: 10.5mm dia, then M12x1.75 tapped''' | |||
*'''Clamp Hole Spacing Along Length: | |||
*'''Clamp Hole Spacing Along Width: | |||
Revision as of 20:44, 28 May 2012
Swivel Plate
- Length:
- Width:
- Thickness: 25.4mm
- Swivel Hole Diameter:
- Swivel Hole Spacing Along Length: 250mm
- Swivel Hole Spacing Along Width: 155mm
- Support Hole Diameter: 12mm with 25mm dia 20 deep countersink
- Support Hole Spacing Along Length: 10mm, 65mm
- Support Hole Spacing Along Width: 25.4mm, 155mm
- Clamp Hole Diameter: 10.5mm dia, then M12x1.75 tapped
- Clamp Hole Spacing Along Length:
- Clamp Hole Spacing Along Width:
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF