Cold Saw/V1 Design Files/Swivel Plate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=Swivel Plate= | =Swivel Plate= | ||
*'''Length: | *'''Length: 457.2mm''' | ||
*'''Width: | *'''Width: 304.8mm''' | ||
*'''Thickness: 25.4mm''' | *'''Thickness: 25.4mm''' | ||
Revision as of 16:06, 31 May 2012
Swivel Plate
- Length: 457.2mm
- Width: 304.8mm
- Thickness: 25.4mm
- Swivel Hole Diameter: 150mm
- Swivel Hole Spacing Along Length: 270mm
- Swivel Hole Spacing Along Width: 190mm
- Support Hole Diameter: 12mm with 25mm dia 8 deep countersink
- Support Hole Spacing Along Length: 30mm, 85mm
- Support Hole Spacing Along Width: 25.4mm, 190mm
- Clamp Hole Diameter: 10.5mm dia, then M12x1.75 tapped
- Clamp Hole Spacing Along Length: 150mm
- Clamp Hole Spacing Along Width: 280mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF